Need help?Do you have a question about the Honeywell FSL100-UVIR and is the answer not in the manual?
General| Humidity | 0 to 95% RH, non-condensing |
|---|---|
| Housing Material | Aluminum |
| Detection Technology | UV/IR |
| Detection Range | Up to 30 meters |
| Field of View | 90° |
| Spectral Response | UV: 185 to 260 nm, IR: 4.3 µm |
| Power Supply | 24 VDC nominal |
| Current Consumption | <50mA |
| Alarm Output | Relay |
| Weight | 1.5 kg |
| Certifications | ATEX, IECEx |
| Operating Temperature | -40°C to +75°C (-40°F to +167°F) |
Provides general safety warnings and cautions for installation and operation.
Lists the safety features incorporated into the FSL100 Flame Detector.
Details the two options for installing the FSL100 series of Flame Detectors.
Presents the FSL100 wiring diagram and terminal allocation for various connections.
Explains general electrical connection options for the flame detector.
Details how to wire the FSL100 to a controller, including cable gland use.
Describes wiring the FSL100 to a fire control panel using the current increase principle.
Illustrates how to wire the FSL100 to a PLC for data transmission.
Explains wiring the FSL100 for a 4-20 mA non-isolated sourcing current output.
Outlines the steps for commissioning the FSL100 flame detector.
Describes the procedure for functional testing of the FSL100 flame detector.
Discusses potential causes of false alarms and how to analyze faults in the FSL100 system.
Provides steps for fault testing and troubleshooting the FSL100 flame detector.
Details North American approvals including cFMus class 3611 and FM class 3260.
To Next Page