Need help?Do you have a question about the Honeywell FS20X Series and is the answer not in the manual?
General| Series | FS20X |
|---|---|
| Housing Material | 316 Stainless Steel |
| Operating Temperature | -67 °F to +185 °F (-55 °C to +85 °C) (depending on model) |
| Approvals | FM, ATEX, IECEx, SIL3 |
| Compatibility | HART, Modbus |
| Certifications | FM, ATEX, IECEx, SIL3 |
| Power Supply | 24 VDC nominal |
| Voltage Range | 18-32 VDC |
Guidelines for proper installation in hazardous and non-hazardous areas.
Procedure for testing detector functionality using a hand-held test lamp.
To Next Page
