Galaxy Programming Manual
20
Option 24 – Print (Quick Menu Option 5)
NOTE: A serial printer must be connected to the Galaxy panel via a printer interface module or an RS232
interface module.
This option allows one of the four listed options to be printed. Only information corresponding to the groups
assigned to the user is printed.
1. Codes – user number and name, level and groups assigned;
NOTE: only the manager can print out the user PINS; the Print Codes parameter (option 51.23) must be
enabled (default is disabled).
2. Zones – address, function, group (if group mode is enabled), status, descriptor (if assigned),
status of the chime, omit and part attributes, the RIO voltage and the zone resistance in Ohms;
3. Log – all events in the log, starting with the most recent and working backwards;
4. All – codes, zones and log details respectively.
The required option is selected by pressing the appropriate key 1-4. The printing begins immediately and can
be aborted by pressing esc.
24 - Print
To Next Page
Loading...
