Honeywell Granit 1980i - Add a Carriage Return Suffix to All Symbologies; Prefix Selections; Suffix Selections

Xenon/Granit User Guide 153
Step 1. Scan the Clear One Prefix or Clear One Suffix symbol.
Step 2. Determine the 2 digit Hex value from the Symbology Chart (included in
the Symbology Charts, beginning on page 327) for the symbology from
which you want to clear the prefix or suffix.
Step 3. Scan the 2 digit hex value from the Programming Chart, beginning on
page 341 or scan 9, 9 for all symbologies.
Your change is automatically saved.
Add a Carriage Return Suffix to All Symbologies
Scan the following bar code if you wish to add a carriage return suffix to all symbol-
ogies at once. This action first clears all current suffixes, then programs a carriage
return suffix for all symbologies.
Prefix Selections
Suffix Selections
Add CR Suffix
All Symbologies
Add Prefix
Clear One Prefix
Clear All Prefixes
Add Suffix
Clear One Suffix