Honeywell Granit 1980i - Page 307

Xenon/Granit User Guide 287
EAN/JAN-8 Addenda Required *Not Required EA8ARQ0 208
Required EA8ARQ1 208
Addenda Timeout Range (0 - 120) *500 DLYADD##### 208
EAN/JAN-8 Addenda
Separator
Off EA8ADS0 208
*On EA8ADS1 208
MSI Default All MSI Settings MSIDFT 209
*Off MSIENA0 209
On MSIENA1 209
MSI Check Character *Validate Type 10, but Don’t
Transmit
MSICHK0 209
Validate Type 10 and
Transmit
MSICHK1 209
Validate 2 Type 10 Chars, but
Don’t Transmit
MSICHK2 210
Validate 2 Type 10 Chars and
Transmit
MSICHK3 210
Validate Type 11 then Type 10
Char, but Don’t Transmit
MSICHK4 210
Validate Type 11 then Type 10
Char and Transmit
MSICHK5 210
Disable MSI Check Characters MSICHK6 210
MSI Message Length Minimum (4 - 48) *4 MSIMIN## 210
Maximum (4 - 48) *48 MSIMAX## 210
GS1 DataBar Omnidirectional Default All
GS1 DataBar Omnidirectional
Settings
RSSDFT 211
Off RSSENA0 211
*On RSSENA1 211
GS1 DataBar Limited Default All GS1 DataBar Limited
Settings
RSLDFT 211
Off RSLENA0 211
*On RSLENA1 211
GS1 DataBar Expanded Default All GS1 DataBar
Expanded Settings
RSEDFT 212
Off RSEENA0 212
*On RSEENA1 212
GS1 DataBar Expanded Msg.
Length
Minimum (4 - 74) *4 RSEMIN## 212
Maximum (4 - 74) *74 RSEMAX## 212
Trioptic Code *Off TRIENA0 212
On TRIENA1 212
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page