Honeywell Granit 1980i - Page 309

Xenon/Granit User Guide 289
QR Code Default All QR Code Settings QRCDFT 219
*On QRCENA1 219
Off QRCENA0 219
QR Code Msg. Length Minimum (1-7089) *1 QRCMIN#### 219
Maximum (1-7089) *7089 QRCMAX#### 219
QR Code Append *On QRCAPP1 220
Off QRCAPP0 220
QR Code Page QR Code Page (*3) QRCDCP## 220
Data Matrix Default All Data Matrix Settings IDMDFT 221
*On IDMENA1 221
Off IDMENA0 221
Data Matrix Msg. Length Minimum (1-3116) *1 IDMMIN#### 221
Maximum (1-3116) *3116 IDMMAX#### 221
Data Matrix Append *On IDMAPP1 221
Off IDMAPP0 221
Data Matrix Code Page Data Matrix Code Page (*51) IDMDCP## 222
MaxiCode Default All MaxiCode Settings MAXDFT 222
On MAXENA1 222
*Off MAXENA0 222
MaxiCode Msg. Length Minimum (1-150) *1 MAXMIN### 223
Maximum (1-150) *150 MAXMAX### 223
Aztec Code Default All Aztec Code Settings AZTDFT 223
*On AZTENA1 223
Off AZTENA0 223
Aztec Code Msg. Length Minimum (1-3832) *1 AZTMIN#### 223
Maximum (1-3832) *3832 AZTMAX#### 223
Aztec Append *On AZTAPP1 224
Off AZTAPP0 224
Aztec Code Page Aztec Code Page (*51) AZTDCP## 224
Chinese Sensible (Han Xin) Code Default All Han Xin Code Settings HX_DFT 224
On HX_ENA1 224
*Off HX_ENA0 224
Chinese Sensible (Han Xin) Code
Msg. Length
Minimum (1-7833) *1 HX_MIN#### 225
Maximum (1-7833) *7833 HX_MAX#### 225
Postal Codes - 2D
2D Postal Codes *Off POSTAL0 225
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page