Performance Series IP Camera Software Configuration Guide
60
Configuring Network Event Settings
Figure 6-9 Disconnection Configuration Interface
Figure 6-10 IP Conflict Configuration Interface
1.
Click Enable to trigger an alarm when there is a network disconnection or an IP conflict.
2.
Click Record to record a video to the microSD card when there is a network disconnection or an IP
conflict.
Note
Record is only supported by the following models:
H2W2PRV3/H2W4PRV3/HBW2PR2/HBW4PR2/HEW2PR2/HEW4PR2/
H4W2PRV2/H4W4PRV2.
To Next Page
Loading...
Need help?
General