Configuring Video and Audio Settings | 43
800-22456 - A - 04/2017
White Balance
White balance compensates for the different color temperatures of different light sources,
ensuring consistent colors- in the image.
In the WB area, you can set the white balance mode to Auto, Manual, ATW, Outdoor, Indoor,
Outdoor Auto, Sodium Lamp Auto, or Sodium Lamp.
Click Save to apply the settings.
Day and Night
In the D&N Mode area, you can set the day and night type,
mode, sensitivity, and delay time.
Set Type to Electronic or ICR.
By default, the camera automatically outputs color video or black-and-white video
depending on the amount of light in the scene. To output only color video, set Mode to Color.
To output only black-and-white video, set Mode to Black & White.
Sensitivity controls the sensitivity to lighting changes that cause the camera to switch
between day (color) and night (black-and-white) mode. Select Low, Medium, or High.
Delay defines the delay time before switching between modes. Select a value between 2s and
10s.
Click Save to apply the settings.
Auto White balance is adjusted automatically.
Manual White balance is adjusted by moving the Red and Blue gain sliders. Click the
+ and – signs to make fine adjustments.
ATW White balance is adjusted automatically for changes in the color
temperature.
Outdoor White balance is optimized for outdoor lighting conditions.
Indoor White balance is optimized for indoor lighting conditions.
Outdoor Auto White balance is adjusted automatically for outdoor lighting conditions.
Sodium Lamp
Auto
White balance is adjusted automatically for sodium vapor lighting (such as
yellow-orange street lamps).
Sodium Lamp White balance is optimized for sodium vapor lighting (such as yellow-orange
street lamps).
Electronic Digital day/night.
ICR True day/night (removable IR cut filter).
To Next Page
Loading...
