Honeywell HDZ302DIN - Configuring System Settings; Configuring General System Settings

800-22456 - A - 04/2017
9
Configuring System Settings 9
This chapter contains the following sections:
• Configuring General System Settings, page 85
• Configuring Date and Time Settings, page 86
• Configuring Account Settings, page 87
• Resetting the Camera, page 92
• Resetting the Camera, page 92
• Backing Up/Restoring a Configuration, page 92
• Configuring Maintenance Settings, page 93
• Upgrading the Firmware, page 93
• Viewing Version Information, page 94
• Managing Logs, page 94
• Viewing Online Users, page 96
Configuring General System Settings
You can configure the device name, user interface language, video standard, analog output,
and status LED settings on the Setup > System Setup > General page.
To change the device name, in the Device Name field, enter a new name, and then click Save .
To change the interface language, select a language from the
Language list, and then click Save .
To change the video standard, select
NTSC or PAL from the Video Standard list, and then click
Save .
To change the
Max Log Quantity , enter a value between 1 and 1024 , and then click Save .