www.honeywell.com/security
106 | Performance Series Full PoE Network Video Recorder User Guide
4. To test your settings, click Test.
5. To copy the motion detection settings to additional channels, click Copy, select the
channels to which you want to copy the settings, and then click OK.
Configuring Video Loss Settings
To configure video loss settings
1. Go to Main Menu > SETTING > EVENT > DETECT > Video Loss.
Figure 8-6 Video Loss Configuration Tab
2. On the Video Loss tab, in the Channel box, select the channel (camera) for which you
want to configure video loss detection settings.
3. Select the Enable check box to enable video loss detection for the selected channel.
4. To set the periods when video loss detection is active, next to Period, click Set, and then
follow the steps listed in To set up motion detection periods on page 103.
5. To set the actions that you want the system to initiate when a video loss event occurs,
follow the steps listed in To set up motion detection event actions on page 104.
6. Click Apply to save your settings.
7. To copy the settings to additional channels, click Copy, select the channels to which you
want to copy the settings, and then click OK.
To Next Page
Loading...
