Honeywell HEN16142 - Page 28

www.honeywell.com/security
28 | Performance Series Full PoE Network Video Recorder User Guide
Assistant Fn • Single window monitor mode: Click this
button to display the Assistant function; to start
PTZ control (not supported); and to configure
the image color.
• Backspace function: When entering letters or
numbers, press and hold for 1.5 seconds to
delete the last-entered character.
• Motion detection: Use in conjunction with the
direction keys.
• Text mode: When entering characters, click to
switch between numbers and letters
(uppercase/lowercase).
• HDD management: Click to switch the HDD
recording information and other information.
(Menu prompt.)
• Other special functions.
Play Previous
I
In playback mode, play the previous video.
Play Next
I In playback mode, play the next video.
Slow Play Click to adjust the playback speed. Various slow
playback speeds are available.
Fast Play

Click to adjust the playback speed. Various fast
playback speeds are available.
Reverse/Pause II • Normal playback: Click to reverse playback.
• Reverse playback: Click to pause playback.
Play/Pause
II • Reverse playback or pause mode: Click to
return to normal playback mode.
• Normal playback: Click to pause playback.
• Pause mode: Click to resume playback.
• Real-time monitor mode: Click to enter the
Search interface.
ESC ESC • Go to the previous menu or cancel the current
operation.
• Playback: Click to go back to the real-time
monitor mode.
Up/Down
  • Activate the current control, modify setup, and
then move up and/or down.
• Increase or decrease the current number.
• Assistant function such as the PTZ menu (not
supported).
Left/Right

• Shift the currently active control, then move left
or right.
• Playback mode: Click to control the playback
bar.
Table 1-2 NVR Front Panel Components
Component Name Icon Function