Configuring Storage Settings
107
Figure 9-3 Snapshot Schedule Settings
2. On the Snapshot tab, in the Channel box, select the channel (camera) for which you want
to configure a snapshot schedule.
3. At the top of the scheduling table, select the check box(es) of the recording type(s) that
you want to schedule:
Regular: The regular recording schedule is indicated by a green bar.
Motion: The motion detection recording schedule is indicated by a yellow bar.
Alarm: The alarm recording schedule is indicated by a red bar.
MD&Alarm: The motion detection and alarm schedule is indicated by a blue bar.
Analytics: The video analytics schedule is indicated by an orange bar.
POS: The POS schedule is indicated by a light blue bar.
4. At the left of the scheduling table, select the day(s) of the week for which you want to
configure a snapshot schedule. To configure the same schedule for all of the days at the
same time, select All.
5. Click or drag the mouse in the scheduling table to set the recording period. To erase a
recording period, click the eraser icon at the right of the table. Alternatively, for the day of
the week that you want to configure, click the gear icon at the right of the table. In the
Period window, set up to six snapshot recording periods. To copy the settings to
additional days, select the appropriate check box(es) under Copy, and then click Save.
6. Click Apply to save your settings.
7. To copy the settings to additional channels, click Copy, select the channels to which you
want to copy the settings, and then click OK.
Configuring HDD Manager Settings
1. Go to Main Menu SETTING STORAGE HDD MANAGER.
To Next Page
Loading...
Need help?
General
