Honeywell HEN643 4 Series - Page 19

Introduction
5
Play/Pause

II
• Reverse playback or pause mode: Click to
return to normal playback mode.
• Normal playback: Click to pause playback.
• Pause mode: Click to resume playback.
• Real-time monitor mode: Click to enter the
Search interface.
ESC
ESC
• Go to the previous menu or cancel the
current operation.
• Playback: Click to go back to the real-time
monitor mode.
Record
Rec
Click to start/stop manual recording.
Up/Down
 
• Activate the current control, modify setup,
and then move up and/or down.
• Increase or decrease the current number.
• Assistant function such as the PTZ menu
(not supported).
Left/Right
 
• Shift the currently active control, then move
left or right.
• Playback mode: Click to control the
playback bar.
Enter
ENTER
• Confirm the current operation.
• Go to the Default button.
• Go to the Menu.
USB 2.0 Port
Connect to a USB 2.0 storage device, USB 2.0
mouse or CD/DVD burner.
HDD Abnormal
Indication Light
HDD
Lights BLUE to indicate an HDD error or when
the HDD capacity is below the specified
threshold.
Network Abnormal
Indication Light
Net
Lights BLUE to indicate that a network error
has occurred or that there is no network
connection.
Figure 1-2 NVR Back Panel HEN081*4 NVR
HEN161*4 / HEN321*4 NVR
HEN162*4 / HEN322*4 / HEN642*4 / HEN163*4 / HEN323*4 / HEN643*4 NVR