What to do if my Honeywell Horizon 7600 Barcode Reader scans but the data is not correct?
The configuration is not correct. Make sure that the proper PC type AT, PS2 or XT is selected. Verify the correct country code and data formatting are selected. Adjust intercharacter delay.
What to do if my Honeywell Horizon 7600 has no LEDs and no beep?
No power is being supplied to the scanner from the host. Some host systems cannot supply enough current to power the 7600 series scanner. Use the power supply included with the scanner.
Why does my Honeywell Barcode Reader beep 3 times on power up?
The cause is a non-volatile RAM failure. Contact a customer service representative if the unit will not hold the programmed configuration.
Why does my Honeywell Horizon 7600 make a continuous razz tone on power up?
This indicates a RAM or ROM failure. Contact a customer service representative if the unit will not function.
What does a razz tone and amber LED flash at power up mean on my Honeywell Barcode Reader?
This indicates a VLD failure. Contact a customer service representative.
General| Brand | Honeywell |
|---|---|
| Model | Horizon 7600 |
| Category | Barcode Reader |
| Language | English |
To Next Page