Do you have a question about the Honeywell YJ HF600 and is the answer not in the manual?
Brand | Honeywell |
---|---|
Model | YJ HF600 |
Category | Barcode Reader |
Language | English |
Instructions for connecting the power supply unit, if it is included with the scanner.
Steps for connecting the scanner using a USB interface.
Steps for connecting the scanner using an RS232 interface.
Steps for connecting the scanner using a Keyboard Wedge interface.
Instructions for changing the keyboard layout by scanning country codes.
Programming the scanner for Keyboard Wedge IBM PC AT and Compatibles with CR suffix.
Programming the scanner for USB IBM SurePos (Handheld Scanner) Interface.
Programming the scanner for USB IBM SurePos (Tabletop Scanner) Interface.
Programming the scanner for USB Keyboard (PC) connection.
Programming the scanner for USB Keyboard (Mac) connection.
Programming the scanner for USB HID Bar Code Scanner connection.
Programming the scanner for USB Serial Port Emulation.
Programming the scanner for USB Japanese Keyboard (PC) connection.
Programming the scanner for RS232 connection.
Scanner activation when a barcode is seen; illumination turns off after reading.
Optimized mode for reading barcodes from mobile phone or other displays.
Scanner activation when a barcode is seen; continuous search for 5 seconds after reading.
Optimized mode for reading barcodes from mobile phone or other LED displays in presentation.
Scan illumination remains on continuously; continuous search for barcodes.
Optimized mode for reading barcodes from mobile phone or other LED displays in streaming presentation.
Initiates the process of entering a new data format.
Resets all previously configured data formats.
Saves the entered data format configurations.