Scan Modes
When in IR Trigger mode, the scanner is activated when it “sees” a
bar code. After the bar code is read, the scan illumination will turn
off. When in IR Trigger - Mobile Phone mode, your scanner is
optimized to read bar codes from mobile phone or other displays.
When in Presentation mode, the scanner is activated when it “sees”
a bar code. After the bar code is read, the scanner continuously
searches for bar codes for 5 seconds. After 5 seconds and no bar
code is read, the scan illumination will turn off. When in
Presentation - Mobile Phone mode, your scanner is optimized to
read bar codes from mobile phone or other LED displays.
When in Streaming Presentation - Normal mode, the scanner
leaves the scan illumination on all the time and continuously
searches for bar codes. When in Streaming Presentation - Mobile
Phone mode, your scanner is optimized to read bar codes from
mobile phone or other LED displays.
IR Trigger Mode
(Default)
IR Trigger Mode - Mobile Phone
Presentation Mode
Presentation Scanning - Mobile
Phone
Streaming Presentation -
Normal
Streaming Presentation - Mobile
Phone
To Next Page
Loading...
Need help?
General
