800-16693 - A - 04/2014
Operating the DVR | 29
Operating the DVR 3
This chapters contains the following sections:
• Using Live View, page 29
• Playing Back Video, page 31
• Exporting Video, page 33
Using Live View
Live view mode is the DVR’s default mode. When you start the DVR, live video from the
connected cameras displays automatically on the monitor.
On-Screen Notifications
The following icons appear in the upper right corner of each channel’s screen when the camera
is recording and/or when an event alarm has been triggered:
Quick Setting Toolbar
The following toolbar appears when you click on a channel in live view mode:
Indicates video is being recorded. This may be a scheduled recording, a recording
initiated manually by the DVR operator, or it may be initiated by motion or a relay alarm.
Indicates video loss/tampering, motion detection, or a relay alarm.
Start/Stop Recording Audio On/Mute Digital Zoom Close
Instant Playback PTZ Control Image Settings
To Next Page
Loading...
Need help?
General