Honeywell HRGX45 - Upgrading HRGX DVR Firmware

800-16693 - A - 04/2014
Operating the DVR | 33
Exporting Video
Use the following procedures to export recorded video files and customized video clips.
To export recorded video files:
1. Insert a USB flash drive or other external storage device into the USB port on the front of
the DVR.
2. Go to Menu > Clip Search > Normal.
3. On the Normal page, under Normal, select the channel(s) you want to search, or click
Analog to select all the channels.
4. Configure the following search parameters:
Note The start and end search points must fall within the range listed next to Start/End
time of record.
•Record Type Select one of the following recording types: Normal , Motion ,
Alarm , Motion |Alarm , Motion & Alarm , Manual , or All .
•File Type Select one of the following file types: Unlocked , Locked , or All .
•Start Time Select the date and time for the start point of the search.
•End Time Select the date and time for the end point of the search.