www.honeywell.com/security
92 | Performance Series HQA Digital Video Recorder User Guide
Configuring Alarm Input Settings
Configuring Local Alarm Inputs
To configure alarm inputs
1. Go to Main Menu > Setting > Event > Alarm > Local Alarm.
2. On the Local Alarm tab, in the Alarm In box, select the alarm input that you want to
configure settings for.
3. Select the Enable check box to enable alarm detection of the selected alarm input.
4. In the Device Type box, select the alarm input type: Normal Close or Normal Open.
5. If you want, in the Alarm Name box, rename the alarm input.
To Next Page
Loading...