6
INSTALLATION (CONTINUED)
EN
4. Connect the window bracket to the window bracket panel adapter by sliding the panel adapter
into the holes of the window bracket, then rotate clockwise until it is locked in place.
Measure and cut the Foam Insulation Tapes to the full length of your window sash and frame.
Peel off the adhesive backing and slowly attach them to the window sash and frame. The gray
tape should attach to the movable window sash.
5.
Horizontal Sliding Window Vertical Sliding Window
Gray
Window Sash
Window Sash
Window Frame
Gray
Black Black
To Next Page
Loading...
