Honeywell KHF 1050 - Description and Operation; System Description

N
KHF 1050 SYSTEM INSTALLATION MANUAL
Page 1
Revison 2 23-10-09 Apr/2006
DESCRIPTION AND OPERATION
1. System Description
A basic KHF 1050 HF Communication System (also known as a Primus HF 1050)
consists of three individual units: KAC 1052 Antenna Coupler, KPA 1052 Power
Amplifier, and KRX 1053 Receiver/Exciter (refer to “Figure 1 - Typical System” ). A
compatible control unit is also required. Control units compatible with the system
include the PS440 (also known as Gables G7511) (refer to “Figure 2 - PS440 Control
Display Unit” ), Honeywell MC-850 Multifunction Control and Display Unit (refer to
“Figure 3 - MC-850 Multifunction Control and Display Unit (MCDU)” ) and Honeywell
RM-855 Radio Management Unit (refer to “Figure 4 - RM-855 Radio Management
Unit” ).
NOTE: For complete installation information on the MC-850 MCDU refer to the
MC-850 installation documentation pertinent to each specific application.
For complete installation information on the RM-855 RMU refer to the
Primus
®
II SRZ-85X Integrated Radio System Operation and Installation
Manual P/N A15-3800-001.
Figure 1 - Typical System