N
KHF 1050 SYSTEM INSTALLATION MANUAL
Page 1010
Revison 2 23-10-09 Apr/2006
4. Bench Test Harness Considerations
The following kits and components are recommended for assembling a Bench-Test
Harness for the KHF 1050 System. Commonly available connectors, such as BNC jacks,
microphone jacks and banana or pin jacks can be purchased from local electronic
component suppliers. Nine-pin null-modem cables may be purchased from computer
supply sources. Also see “Figure 1001 - KHF 1050 System Bench Test Harness” .
Quantity Honeywell PN Description
1 050-03658-0002 KAC 1052 Single Vertical Installation Kit
(connectors only)
1 050-03629-0002 KPA 1052 Installation Kit
(connectors only)
1 050-03628-0002 KRX 1053 Installation Kit
(connectors only)
1 050-03669-0000 PS440 Connector Kit (Note 1)
1 030-00216-0000 Conn, RF, Adapter, BNC(F) to HN(M)
(For bench use only)
1 033-00230-0000 Telephone Jack, Four Conductor (Note 2)
1 155-02794-0001 Computer Cable
9-Pin D to Four-conductor Plug
(Note 2)
To Next Page
Loading...
