EasyManua.ls Logo

Honeywell KHF 1050 - Page 44

Honeywell KHF 1050
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
N
KHF 1050 SYSTEM INSTALLATION MANUAL
Page 18
Revison 2 23-10-09 Apr/2006
AN-14 3,830 Nominal Circular Mil Area
0.150 inches Max. Overall Diameter
2.99 ohms Max. per 1000 feet @ 20°C
32 amps Max. Cont. Current Rating**
17 amps Max. Cont. Current Rating***
AN-12 6,088 Nominal Circular Mil Area
0.170 inches Max. Overall Diameter
1.88 ohms Max. per 1000 feet @ 20°C
41 amps Max. Cont. Current Rating**
23 amps Max. Cont. Current Rating***
High Voltage HN Cables:
155-02988-0015
(Note)
Designed for single 1050 installations.
Length is 15” (38.1 cm).
Both connectors are right angle with the same orientation.
Weight = 0.7 lbs
155-02988-0121 Designed for single 1050 installations.
Length is 21” (53.34 cm)
Both connectors are right angle, 180 degree indexing
(one connector up, one down).
Weight = 0.8 lbs
155-02988-0217 Designed for single 1050 installations.
Length is 17” (43.2 cm).
One connector is right angle, the other is straight.
Weight = 0.6 lbs.
155-02988-2217 Designed for single 1050 installations.
Length is 17” (43.2 cm).
Both connectors are straight.
Weight = 0.6 lbs
Equipment Required But Not Supplied
AIRCRAFT EQUIPMENT DESCRIPTION

Table of Contents

Other manuals for Honeywell KHF 1050

Related product manuals