BCU 480 · Edition 03.16l 19
Function
3.2 BCU..P with 16-pin industrial plug
connector
The burner control unit BCU 480..P can be supplied
with an industrial plug connector (pursuant to VDE
0627). This 16-pin plug connector ensures fast con-
necting or disconnecting of units without any addition-
al wiring required. This simplifies replacing the unit and
reduces standstill times.
All signals to the higher-level control system, the mains
supply and the safety interlocks are routed via this plug,
see page 71 (Accessories).
To Next Page
Loading...
