Honeywell LonWorks User Manual

Midas
®
Gas Detector
8-5
6. Remove the 4 pump module screws.
7. Remove the two fixing clips and disconnect the
tubes at the manifold.
8. Slide the pump module out and disconnect
the connector from the pcb.
9. Fit the new pump module following the steps
above in reverse order. Orient the metal retaining
clamps away from the pump wiring to prevent
damage. Route pump wiring away from the
chassis and manifold to prevent damage.

Honeywell LonWorks Specifications

General

Brand	Honeywell
Model	LonWorks
Category	Gas Detectors
Language	English