– 21 –
SECURING THE PREMISES
SECURING THE PREMISESSECURING THE PREMISES
SECURING THE PREMISES
Arming the System
Armed Away
7000-100-024-V0
More
Message
Zones
Disarm
10:18 AM June 8, 2010
System
4. At the end of the exit delay the system will announce “Armed
Away” and displays the “Armed Away” screen.
If an invalid User Code is entered or if a valid user code has not been entered within 10 seconds, the system will
return to the “home” screen and it will not be armed.
Silent Exit Feature
If Silent Exit feature is enabled, when the LYNX Touch is armed AWAY, the Exit beeps will be silenced. In
addition, the panel will double the exit delay time before arming AWAY.
Ready To Arm
7000-100-020-V0
Arm Away
Delay More
Message
System
Arm Stay
10:18 AM June 8, 2010
Zones
1. Select the Arm Away icon, the system displays a keypad.
Ready To Arm
Arm the system in Away
mode
Silent Exit
Enter Code:
2 31
5 64
0
8 97
Cl ea r
5200-100-018-V0
Ca nc el Quick Arm
2. Select the Silent Exit button. If enabled, the Silent Exit button
turns green. Enter a valid User Code.
OR
If Quick Arm has been enabled, select the “Quick Arm” icon.
7000-100-023-V0
Armed Away - Exit Now
Exit now
28 seconds
Disarm Restart
More
Message
Zones
10:18 AM June 8, 2010
System
3. The system beeps two times and announces “Armed Away
Exit Now. The exit delay screen is displayed. If programmed
the display counts down the time remaining in the exit delay
in seconds.
To Next Page
Loading...
Need help?
General
