Honeywell LYNX TOUCH L7000 SERIES User Manual

– 23 –
SECURING THE PREMISES
SECURING THE PREMISESSECURING THE PREMISES
SECURING THE PREMISES
Arming the System
Arming the System with no delay (Instant)
Use “Instant” with Stay mode when you are staying home and do not expect anyone to use the entrance door.
Use “Instant” with Away mode when the premises will be vacant for extended periods of time such as vacations,
etc. When armed with “Instant”, the system will sound an alarm if a protected door or window is opened,
including the entrance door. You may leave through the entrance door during the exit delay period without
causing an alarm, but an alarm will sound as soon as someone reenters.
When armed “Instant” with Stay mode, the control beeps three times and displays the “Armed Stay Instant”
message. In addition, the red Armed indicator lights and the system announces “Armed Stay Instant –exit now”.
When armed “Instant” with Away mode, the control beeps two times and displays the “Armed Away Instant”
message. If Exit Warning is enabled the system beeps continuously for the duration of the exit delay. In
addition, the red Armed indicator lights and the system announces “Armed Away Instant –exit now”.
To Arm the System with No Delay (Instant)
Ready To Arm
7000-100-020-V0
Arm Away
Delay More
Message
System
Arm Stay
10:18 AM June 8, 2010
Zones
1. Select the “Delay” tab on the Security Screen. The icon
“toggles” and “Instant” is displayed.
2. Arm the system in the “Stay” or Away” mode normally.
Note: The entry delay time is eliminated when “Instant” is selected.
Quick Exit
If active, you can restart the exit delay at any time after the system has been armed in Stay or Away mode by
selecting the “Quick Exit” icon. This avoids having the user disarm then re-arm the system after allowing
someone to enter or exit. The system will re-arm once the exit delay expires.
Ready To Arm
7000-100-020-V0
Arm Away
Delay More
Message
System
Arm Stay
10:18 AM June 8, 2010
Zones
1. Select the “Quick Exit” icon to restart the exit delay.
Note: Quick Exit is active in Away mode when: Auto Stay mode is
enabled and no entry/exit zone has been faulted during the exit
delay period.

Honeywell LYNX TOUCH L7000 SERIES Specifications

General

Brand	Honeywell
Model	LYNX TOUCH L7000 SERIES
Category	Security System
Language	English