13
System Sounds
Beeping The Gateway touchpad is being pressed to enter codes or other
functions, an entry/exit delay is in process, or a trouble condition exists
(for example, a low battery condition).
System sounders or sirens
The system is in Alarm. Alarm volume is
adjustable.
:
The system volume is adjustable through the
™ App for voice
announcements, chimes and most sounds
A beep every 45 seconds indicates one of your wireless devices has a low battery condition.
Use the
App to see which device(s) need new batteries.
Arming Options and LEDs
Press any of the arming options and the numbers light. Basic security functions include:
(typically
and enter your user code
(typically when someone is home)
and enter your user code
in
or
3 seconds
the system and enter your user code
Switching Arming Modes
You can easily switch between arming modes without having to first disarm the system. When
the system is armed or while arming or disarming, simply press the desired arming option and
enter your user code. (This feature is available only from the Gateway Touchpad or a Wireless
Key.)
Auto-Home Mode Operation: If your system is programmed to do so, it automatically arms in
Home mode when you select Armed Away but no one opens an exit-delay door.
Emergency Options
Depending on your system set up, when an Emergency Type option is pressed, emergency
messages can be sent to your monitoring company (if programmed to do so).
Refer to the
Emergency Alarms section of Operating your Gateway with the MyHome Gateway
App for additional details.
The system Emergency Type options appear.
or
The system sends an emergency message to the monitoring company, if
programmed up to do so.
Press
when it is blinking to cancel the Emergency before it is sent.
To Next Page
Loading...
