35
Smart Scenes and User Access (Continued)
To work with Smart Scenes:
1. Select Smart Scenes on the Home screen. A keypad appears.
2. Enter a user code to display the Smart Scenes menu. From here, Smart Scenes can be
created* or viewed by type.
Creating a Smart Scene using the MyHome Gateway App
These instructions apply to the creation and operation of Smart Scenes from the MyHome
Gateway
App. If your system is connected to Total Connect remote services, you can create
Smart Scenes only through Total Connect. Working with Smart Scenes from Total Connect differs
slightly. (Note that
Anytime
scenes are labeled as “When you manually run this scene” or “When
you click it” in Total Connect.)
Creating any Smart Scene involves these settings:
• Name
• The type of trigger that initiates the Smart Scene
• The type of user who can manually run the Smart Scene
• The resulting action(s) that take place when the triggering events or conditions occur
NOTE: Creating a Smart Scene should begin with giving it a Name.
1. Select Add New. (The default name that appears may differ from the illustration.)
2. Press Name.
3. Use the onscreen keyboard to enter a name and Save it.
4. Select the type of user who can run the Smart Scene. Choices include:
• Master
• Regular Users
• Guest
5. Press Action Type to toggle through the types of Smart Scene.
a. Anytime: Go to Step 6.
b. Scheduled: Go to Step 7.
c. Triggered: Go to Step 8.
To Next Page
Loading...
