52
Event Log Codes
The Gateway’s Event Log can record and display as many as 6000 system events. Events are stored
locally in the Gateway, in chronological order and sent to your monitoring company as needed.
When the maximum number of stored events is reached, the oldest 2000 entries are deleted to
make room for logging new events.
The Event log, viewed from the MyHome Gateway App, provides a description of the event and an
event code. The tables below provide definitions of the events/codes that may be transmitted to
the Central Station and/or displayed by the MyHome Gateway App. (“E” Codes indicate an Event
and “R” codes indicate the event was Restored.)
NOTE: If the Gateway’s backup battery is exhausted after AC power is lost, any system activity
occurring after Low Battery notification is not saved. Additionally, the Gateway reverts to the status
condition as before the low battery notification.
Event Log Codes
Event Code
Alarm, Fire Fire
Alarm, Duress Duress
Alarm, Silent Silent
Alarm, Audible Audible
Alarm, Perimeter Perimeter
Alarm, Interior Interior
Alarm, Entry/Exit Entry/Exit
Alarm, Day/Night Day Night
Alarm, Tamper Tamper
Expansion Module Tamper Expansion Module Tamper
Silent Burglary Silent Burglary
24-Hour Non-Burglary 24 Hour Non-Burglary
Carbon Monoxide Detected Carbon Monoxide Detected
Trouble, AC Loss AC Loss
Trouble, Low System Battery Low system battery
Trouble, System Reset System Reset
System shutdown System shutdown
System Tamper* System Tamper
Trouble, Case Tamper Cover Tamper
Trouble, RF Receiver Jam Detect RF Jam Detect
Long Range Radio Reset Long Range Radio Reset
Trouble, Long Range Radio Transmitter Fault Comm. Trouble
Failure to Communicate Event Failure to Communicate Event
Trouble, Fire Trouble Fire trouble
Trouble, Exit Error Alarm Exit error alarm
Trouble, Sensor Sensor trouble
Trouble, Loss of Supervision RF Superv Loss-RF
Trouble, Sensor Tamper Sensor Tamper
Continued next page
To Next Page
Loading...
