Honeywell Lyric LCP300-LC - Arming States and Modes; Understanding Arming States; Arm Away Mode Operation

18
Arming states include
Arm Away For times when no one is home; protects all perimeter (doors and
windows) and interior zones.
Arm Home For times when the house is occupied; protects only perimeter zones.
Arm Custom Arms the system with pre-selected zones bypassed.
Bypass This feature allows you to arm the system while intentionally leaving
selected zones unprotected.
Arm Night For times when the house is occupied; protects perimeter zones and
selected interior motion sensors if used. Other interior zones are
unprotected. Enabled by your installer and only used with interior motion
sensors.
Instant For times when Entry/Exit doors are not expected to open at all.
Entry Delay is eliminated. When the system is armed, an alarm occurs
immediately if an exterior door is opened.
Quick Arm
Used to arm the system in any mode without entering a user code, if programmed.
NOTE: A user code is always needed to disarm the system.
Auto Home If you arm the system in the “Away” mode but no one exits, the alarm system
automatically changes to the “Home” mode. This helps to prevent unwanted
alarms when someone remains on the premises. Disarm the system and Arm
Away again when you are ready to leave. This option is enabled by your
installer.
Arm Away
Security > Arm Away
By default, this mode’s exit delay countdown is accompanied by a beeping sound.
For a silent exit, press Silent Exit first.
• The system beeps twice and announces “Armed Away; exit now”. The exit delay
countdown begins.
• Press Restart Timer if you need more time to leave.
• Leave the premises and close the door before the countdown ends.
• The system arms in Away mode. (Door and window sensors and interior motion sensors
are active.)