54
Event Log Codes
Event Code
Thermostat Fan Mode Manual On Thermostat Fan Mode Manual On
Thermostat Fan Mode Circulate Thermostat Fan Mode Circulate
Thermostat Set Heat Point Thermostat Set Heat Point (and temperature)
Thermostat Set Cool Point Thermostat Set Cool Point (and temperature)
Thermostat Hold Thermostat Hold
Thermostat No Scheduling Thermostat No Scheduling
Thermostat Normal Mode Thermostat Normal Mode
Low Battery Low Battery (Z-Wave Device)
Low Battery Restore Low Battery Restore (Z-Wave Device)
Critical Panel Firmware Update Downloaded Critical Panel Update Downloaded
*If your Central Monitoring Station receives a “Comm. Fail” message (E316), your system has been tampered with and may have
been compromised. This occurs if no signal is heard from the alarm panel within 15 minutes following a delayed alarm.