Honeywell Marathon - Network with SIM Card

Network with SIM Card
Select Connection
Label Description
Select automatically Selects the best suited network automatically
Use GPRS/EDGE only Use only GPRS/EDGE for a connection
Use UMTS/HSPA only Use only UMTS/HSPA for a connection.
Select and tap Apply. A "Network changed successfully" message is displayed.
Close the tab and view the signal strength icon in the main window. Once the signal strength is displayed, you can establish a
connection.
Select Network
Use this option to select from available networks.
Note: When you are registered to a CDMA network, you cannot select the network. "All CDMA network" is shown instead.
Note: The network list only appears if the connection setting is Only use GPRS or Only use UMTS/HSPA.
4-69