OneClick Internet
This section contains the User Manual for the customized version of WebToGo's OneClick Internet for the Honeywell
Marathon.
OneClick Internet is installed by Honeywell on all Marathons equipped with a WWAN radio. Available carriers and OneClick
features may vary by device.
OneClick Internet provides:
l Internet connection management
l Email download
l SMS Management
l Contact management for SIM and Microsoft Outlook
l GPS Management
Since WebToGo OneClick Internet is preinstalled, it is present on the Windows Start Menu. A desktop icon is also provided.
Honeywell does not recommend using standby on the Marathon while the WWAN connection is active. When
exiting standby, a delay of one minute or more may occur as the WWANradio reads firmware files and initializes
before reconnecting. If this delay is acceptable to the user, standby may be enabled.
Preparing for Initial Use on the Marathon
Install SIM Card
If using a CDMA carrier such as Verizon, skip this step because a SIM card is not used.
Install a SIM card in the Marathon.
Load Firmware
While the OneClick Internet utility is preinstalled, it is necessary to load the GOBI radio firmware for your selected carrier such
as AT&T, T-Mobile or Verizon.
Note: For carriers requiring a SIM card, the firmware may automatically be selected when a SIMcard is installed in the
Marathon.
Doubletap the OneClick Internet icon on the Marathon desktop.
Tap the Settings button and select the Firmware tab. Select the firmware for your carrier from the list and tap Change.
For more details, see OneClick Internet Connection Manager and the Firmware tab.
Activation
This step is only necessary for Verizon.
You need the IMEI number for the Marathon when you contact Verizon prior to activating service on the Marathon. The IMEI
number can be found on the Settings > Info tab.
4-62
To Next Page
Loading...
Need help?
General
