Honeywell ms5100 - Scanner Operation; Two Modes of Operation

12
Scanner Operation
Modes of Operation
CodeGate
®
, Out-of-Stand
 CodeGate activates when removed from the stand
 Bar code data is transmitted when the button is pressed
Manual Activation Mode*, Out-of-Stand
 Button activates laser
 Bar code data is scanned and transmitted while button is held down
CodeGate
Manual Activation Mode*
* This feature is not a default
setting. Refer to the MetroSelect
Configuration Guide for
instructions on enabling the
Manual Activation Mode.
Figure 10. CodeGate Enabled Figure 11. Manual Activation Mode