Backlights and Indicators
Status LEDs
The MX7 System Status LED is located at the top left of the keypad, below the F3 key. The Alpha Mode LED is located below
the F4 key on the 32-key keypad.
LEDs (Light Emitting Diodes) are located on the front of the MX7. They are:
1. System Status LED indicates power management status.
2. Alpha Mode Status LED applies to the 32-key keypad only.
System Status LED
Blinking Red Battery power fail; critical suspend mode
Steady Red Main battery low
Blinking Green Display turned off
Yellow / Amber A few seconds when Power key is pressed
No Color No user intervention required.
Alpha mode Status LED
Steady Green Device is in “Alpha” character input mode
No Color Device is in “Numeric” key input mode
Scan Status
An oval indicator situated below the keypad and next to the On button.
Steady Green Good scan
Steady Amber Decoder engine storing changed parameters
Steady Red Scan in progress
No Color Scanner / Imager ready for use or no scanner installed.
2-5
To Next Page
Loading...
