EasyManua.ls Logo

Honeywell Notifier AFP-3030

Honeywell Notifier AFP-3030
22 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 2 of 2 DOC-02-026 Rev. A
© 2009 by Honeywell International Inc. All rights reserved.
Unauthorised use of this document is strictly prohibited.
This document is not intended for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specic applications or anticipate all requirements.
All specications are subject to change without notice.
For more information contact your nearest Notier Sales Oce or Distributor
www.notier.com.au
Specications
Size: 5.3cm high x 10.4cm diameter installed in
B501 base
Operating Temperature: FSP-851, 0°C to 49°
Relative Humidity: 10%-93% noncondensing.
Electrical Specications
Voltage Range: 15-32 volts DC peak.
Standby Current (max. avg.): 300μA @ 24VDC (one communication
every ve seconds with LED enabled).
LED Current (max.): 6.5mA @ 24VDC (‘ON’).
Ordering Information
FG-03-011 FSP-851AUS FlashScan Photo-optical Sensor

Related product manuals