Honeywell Notifier DVC-AO User Manual

ECN12-0027 1
1 Product Overview
This Product Installation Sheet describes how to install the DVC-AO Interface Module to the DVC and the DA
Modules.
The DVC-AO Interface Module filters out the buzzing tone occurring when the Audio Outputs are not active.
WARNING:
Remove all power sources to the Fire Panel before installing the DVC-AO
Interface Module. Leave the external and main power OFF until installation of the DVC-AO
Interface Module is complete.
2 Installation
2.1 Mounting
1. Fix the supplied DVC-AO Spacers (#GEN-01-002) to the CHS bracket
Figure 2-1 – Affixing Spacers to CHS Bracket
9 Columbia Way
Baulkham Hills, NSW 2153
PH 02-9894-1444 • FAX 02-9894-4193
www.notifier.com
ASY-02-035 DVC-AO Interface Module
Product Installation Sheet
DOC
-
03
-
050
ECN12
-
0027
04
/
06
/201
2
Rev:
1.0
0

Honeywell Notifier DVC-AO Specifications

General

Type	Control Unit
Model	DVC-AO
Input Voltage	24 VDC
Channels	1
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	10% to 93% non-condensing
Current Consumption	100 mA max
Mounting	DIN Rail
Compatibility	Notifier Fire Alarm Control Panels
Weight	0.5 lbs (0.23 kg)

Summary

Product Overview

Installation

Module Mounting Instructions

Instructions for affixing and securing the DVC-AO Interface Module to the CHS bracket.

Product Components

Supplemental Documentation