ID50 Series Panel - Installation, Commissioning & Configuration Manual
Contents
iii 997-263-000-11, Issue 11
January 2010
5.5.2 Site Details 45
5.5.3 Device Options 46
5.5.4 Peripheral Options 53
5.5.5 Day/Night Settings 61
5.6 Circuit Options 67
5.6.1 Signalling Line Circuit (SLC) - Devices 67
5.6.2 Signalling Line Circuit (SLC) - Learn 77
5.6.3 On-Board Circuits 79
5.7 Control-By-Event Output Rules 81
5.7.1 Output Type 84
5.7.2 Filter-by-type 85
5.7.3 Evacuation 86
5.7.4 Silence 86
5.7.5 Interrupt Delay 87
5.7.6 Class Change 87
5.7.7 Two Zone 88
5.7.8 Zones 89
5.7.9 Device Inputs 90
5.7.10 Soak Timer 91
5.8 Zone Texts 91
5.9 Access Options 92
5.10 System Options 93
5.10.1 Crystal Frequency 94
5.10.2 Wipe Memory 95
5.11 Normal 95
Appendix 1 - Specification A1-1 to A1-6
Appendix 2 - ID60 Single Loop Panel
Differences A2-1 to A2-5
Appendix 3 - Fault Messages & Meanings A3-1 to A3-4
Appendix 4 - EN54-2 Options with
Requirements A4-1 to A4-4
Appendix 5 - Configuration of a Fault Routing
Output Using a Zone Monitor A5-1
To Next Page
Loading...
Need help?
General
