Honeywell Novar ES3.S User Manual

MOUNTING AND WIRING INSTRUCTIONS
31-00366-01
Novar ES3.S Executive Controller
Contents
Introduction .................................................................................. 2
Precautions ................................................................................... 2
Wiring .............................................................................................. 4
Installing Executive controller ............................................... 4
Checking Installation ................................................................ 7
Specifications ............................................................................... 8
Assembly Board Details ............................................................ 9
Regulatory Compliance ............................................................ 12

Honeywell Novar ES3.S Specifications

General

Brand	Honeywell
Model	Novar ES3.S
Category	Controller
Language	English

Summary

Introduction and Precautions

Precautions

Safety guidelines during installation and operation.

Dimensions

Installing the Executive Controller

Mounting on Base Plate

Step-by-step guide for physically mounting the controller.

Wiring

Instructions for connecting wires and sensors to the controller.

Legacy Sensor Information

Outside Light Sensor Connections

Connecting the analog outdoor light sensor to the transition board.

Universal Input Wiring for OLS

Configuring the OLS input for universal sensor types.

Outdoor Temperature Sensor

Universal Input Wiring for OTS

Configuring the OTS input for universal sensor types.

RS485 Communications Networks

Details on RS485 network polarity standards.

Checking Installation

Hardware Checks

Procedures for verifying physical installation and connections.

Software Setup

Guidance on software setup and programming.

Specifications

Assembly Board Details

Proper Grounding

LED Status Indicators

Output Indicators

Explains the function of output status LEDs.

Power and IO Module Status Indicator

Describes power and I/O module status LEDs.

COM Port Status Indicator

Details the function of COM port transmit/receive LEDs.

Configuration and Part Numbers

Universal Input Configuration Switches

Switches for selecting input modes for sensors.

Model and Part Numbers

List of part numbers for ordering related components.

Regulatory Compliance

Compliance information for safety and emissions standards.

Canadian Regulatory Information

Canadian Dept. of Comms. (DOC)

Canadian interference-causing equipment regulations.

Waste Electrical & Electronic Equipment

Guidance on proper disposal of the product.