What to do if Honeywell Scanner scans but transmits incorrect data to the host?
If your Honeywell Scanner scans, but the data transmitted to the host is incorrect, verify that the scanner’s data format matches the format required by the host. Also, ensure the scanner is connected to the proper host port.
What to do if some characters don't work on Honeywell Scanner?
If everything works except for a couple of characters on your Honeywell Scanner, these characters may not be supported by the current country’s key lookup table. Try operating the scanner in Alt Mode.
How to fix dropped characters on Honeywell Orbit 7120?
If characters are being dropped by your Honeywell Scanner, the inter-character delay needs to be added to the transmitted output. Add some inter-character delay to the transmitted output by using the MetroSelect Configuration Guide (PN 00-02407).
Why Honeywell Orbit 7120 Scanner beeps at some bar codes and not others?
If your Honeywell Scanner beeps for some bar codes and not others of the same type, the bar code may have been printed incorrectly. Check for check digit, character, or border problems.
Why Honeywell Orbit 7120 Scanner beeps only for some bar codes?
If your Honeywell Scanner beeps for some bar codes but not for others of the same symbology, check if check digits are set properly.
Why Honeywell Scanner scans the bar code but there is no data?
If your Honeywell Scanner scans the bar code but there is no data transmitted, the unit may not be configured correctly. Make sure the scanner is configured for the appropriate mode.
What to do if Honeywell Orbit 7120 Scanner scans but the data is not correct?
If your Honeywell Scanner scans but the data is not correct, make sure that the proper PC type (i.e., AT or PS2) is selected.
Why the data from Honeywell Scanner does not look correct on the host?
If the host is receiving data from your Honeywell Scanner, but the data doesn't look correct, it's possible that the scanner and host are not configured for the same interface. Check that both the scanner and the host are configured for the same interface.
General| Type | Fixed bar code reader |
|---|---|
| Sensor type | Laser |
| Scanner type | 1D |
| Light levels (direct sunlight) | 0 - 4842 lx |
| Linear (1D) barcodes supported | - |
| Standard interfaces | USB, RS-232 |
| Connectivity technology | Wired |
| Product color | Black |
| Power source type | DC |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 0.9 W |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 105 mm |
|---|---|
| Width | 102 mm |
| Height | 150 mm |
| Weight | 400 g |
Detailed description of the Honeywell 7120 Orbit scanner's purpose and design.
Lists basic kit components and optional accessories for the 7120 Orbit scanner.
Identifies and describes the main physical parts of the 7120 Orbit scanner.
Step-by-step instructions on how to detach the scanner's cable.
Explains the location and meaning of caution and serial number labels on the scanner.
Guidelines for cleaning and maintaining the scanner's window and exterior.
Instructions and diagrams for mounting the 7120 Orbit scanner on walls or counters.
Procedure for connecting the 7120 Orbit scanner using the RS232 interface.
Procedure for connecting the 7120 Orbit scanner using the RS485 interface.
Procedure for connecting the 7120 Orbit scanner via a keyboard wedge interface.
Procedure for connecting the 7120 Orbit scanner as a stand-alone keyboard device.
Procedure for connecting the 7120 Orbit scanner using a full-speed USB interface.
Explains the various beep tones and patterns used by the scanner.
Describes the meaning of different LED states and patterns on the scanner.
Details scanner failures indicated by specific LED and beep combinations.
Outlines the normal scan zone dimensions for the 7120 Orbit scanner.
Provides scan zone data based on barcode element width for normal scanning.
Details the operational parameters of the 7120 Orbit scanner, including light source and scan speed.
Lists the physical dimensions, weight, and tilt specifications of the 7120 Orbit scanner.
Covers voltage supply, power consumption, and DC transformer requirements.
Specifies the operating and storage temperature, humidity, and contaminant resistance.
Details the communication protocols supported by different 7120 Orbit scanner models.
Lists supported keyboard types and country-specific keyboard layouts.
Describes the three available methods for configuring the 7120 Orbit scanner.
Details the pin assignments for various interface types on the 7120 scanner.
Illustrates and describes host-side connector configurations for scanner cables.
Provides critical safety warnings related to laser light exposure and LED usage.
Details Electromagnetic Compatibility (EMC) standards for the scanner.
Outlines FCC rules applicable to Class A digital devices.
Outlines FCC rules applicable to Class B digital devices.
To Next Page