Honeywell Pro-Watch 6000 - Page 27

PW-6000 2-Reader Input Module Programming Sheet
PW-6000 Two-Reader Module Installation Guide 17
Reader 0
ProWatch Reader 0 (the
reader address used in
the Pro-Watch
hardware setup)
VDC Select J2 5 Volt Connected
Cable #
Cable Destination Conductor
Color
DC Out ( + ) Pin #1
Red LED Pin #2
Beeper Ctrl Pin #3
Data - 1 Pin #4
Data - 0 Pin #5
Common Pin #6
Door 2 Input / Output
Connected
Cable #
Cable Destination Conductor
Color
Input 2 Pin #1
Input 2 Com Pin #2
Input 3 Com Pin #3
Input 3Com Pin #4
Relay 2 No Pin #5
Relay 2 Com Pin #6
Relay 2 NC Pin #7
Relay 3 No Pin #8
Relay 3 Com Pin #9
Relay 3 NC Pin #10