12 www.honeywell.com
PW7K1R1E Wiring and Setup
Jumper Configuration
2.3 Jumper Configuration
Figure 2-3: J5 Jumper Location
TB5-3 NC Relay K1-Normal Closed Contact
TB5-4 NO Relay K2-Normally Open Contact
TB5-5 2-C Relay K2-Common Contact
TB5-6 NC Relay K2-Normally Closed Contact
TB6-1 NO Relay K3-Normally Open Contact
TB6-2 3-C Relay K3 – Common Contact
TB6-3 NC Relay K3 – Normally Closed Contact
TB6-4 NO Relay K4 – Normally Open Contact
TB6-5 4-C Relay K4 – Common Contact
TB6-6 NC Relay K4 - Normally Closed Contact
TB7-1 GND Reader Power Ground
TB7-2 TR- 2-Wire RS-485 TR- (B) See Note 1 below
TB7-3 TR+ 2-Wire RS-485 TR+(A) See Note 1 below
TB7-4 RVO 12 Vdc Reader Power Output
Table 1: PW7K1R1E Terminal Connections
Terminal Acronym Description
J5 Jumper hidden under TB5
To Next Page
Loading...
