PX4i and PX6i High Performance Printer User Guide 13
your media supplier or test the media to make sure that it is suitable for your
application.
• may limit registration performance when printing on labels that have a label
length of less than 25 mm (1 in).
You can also install an optional label taken sensor so that the next copy in the
batch is not printed until the current copy is removed. For more information, see
"Accessories for the Printer" on page 124.
To load media for peel-off printing
1. Turn off the printer.
2. Open the front door and media cover.
3. (PX6i only) Pull the locking handle down.
f
To Next Page
Loading...
