Release 1 34-ST-25-19 RMA 3000 Remote Meter Assemblies User Manual 23
6/04
Marking,
ATEX Directive
Honeywell’s RMA 3000, Models RMA300, DM, SM & ME Remote Meter
Assemblies, with the following nameplates attached, has been certified to comply
with Directive 94/9/EC of the European Parliament and the Council as published in
the Official Journal of the European Communities No. L 100/1 on 19-April-1994.
The following information is provided as part of the labeling of the transmitter:
• Name and Address of the manufacturer: Honeywell, Phoenix, AZ 85053 USA.
• Notified Body identification: KEMA Quality B.V., Arnhem, the Netherlands
• Complete model number (See the Model Selection Guide 34-ST-16-46).
The serial number is 10 digits long. The first digit is the STT Type (R, U, or S.)
The second digit is the year code (0-9). The third and fourth digits are the week
code (in hexadecimal). The remaining six digits are the serial number.
Apparatus Marked
with Multiple Types
of Protection
The user must determine the type of protection required for installation the
equipment. The user shall then check the box [D] adjacent to the type of protection
used on the equipment certification nameplate. Once a type of protection has been
checked on the nameplate, the equipment shall not then be reinstalled using any of the
other certification types.
Marking and Inscriptions
Nameplate 51452468-001, d, is mounted on the enclosure. The following is a representation of this
nameplate:
To Next Page
Loading...
Need help?
General
