Need help?Do you have a question about the Honeywell MagneW 3000 Plus and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | MagneW 3000 Plus |
| Category | Measuring Instruments |
| Language | English |
Describes integral and remote detector/converter configurations.
Explains flow measurement via Faraday's Law.
Details integral/remote types and detector connection methods.
Highlights display, sensor, lining, and connection features.
Role of the detector in measuring flow signals.
Converter's role in signal processing and output.
Config via SFC, DOP, TPS and display details.
Using DOP/SFC for troubleshooting messages.
Explains SFC and TPS network integration.
Shows wiring requirements for integral/remote models.
Covers cable types, laying, lengths, and grounding.
Details cable length limits and grounding requirements.
Discusses lining/electrode material choice based on fluid corrosiveness.
Recommends matching ground ring material to electrodes.
Summarizes key factors for flowmeter installation.
Details accuracy for different diameter ranges and flow velocities.
Covers flow ranges, conductivity, temp/pressure limits, damping, etc.
Describes current/contact outputs, display features, and operator interface.
Covers converter/detector mounting and connection types.
Details flange ratings, enclosure structures, and finishes.
Lists materials for converter, detector flange, case, and terminal box.
Lists materials for wetted parts, conduit, nuts/bolts, and connections.
Covers electrical connection, cable types, length, grounding, dimensions, and weight.
Provides drawings for wall mounting configurations.
To Next Page