Honeywell MagneW 3000 Plus - Environmental and Operating Conditions

1/98 MagneW 3000 PLUS Specification and Application Guide 23
Table 6—Specifications for MagneW 3000 PLUS , continued
Environmental and Operating Conditions
Ambient Temperature Converter: –25 to +60°C (–13 to +140°F)
Detector:
• Integral model: –25 to +60°C (–13 to +140°F)
• Remote model, PFA lining: –30 to +80°C (–22 to +176°F)
• Remote model, polyurethane rubber lining/chloroprene rubber lining:
–30 to +60°C (–22 to +140°F)
Relative Humidity 5 to 100%
Power Requirements • Voltage (Vac) ±10%: 100, 110, 115/120, 200, 220, 230/240
•
Voltage (Vdc) ±10%: 24
•
Frequency: 50 or 60 Hz
Power Consumption 13W (17 VA)
Approval Bodies Model No. Approval Body Approval Type and Classification
MGG14C CSA and FM Nonincendive – Class I, II, III, Division 2,
Remote Converter Groups A, B, C, D, E, G
MGG17D, F, U CSA and FM Special Protection – Class I, II, III, Division 1,
Remote Detector Groups B, C, D, E, F, G
MGG18D, F, U CSA and FM Nonincendive – Class I, II, II, Division 2,
Remote Detector Groups A, B, C, D, F, G
(Water Tight)
MGG19D, F, U CSA and FM Nonincendive – Class I, II, III, Division 2,
Remote Detector Groups A, B, C, D, F. G
(Submersible)
MGG14C (Converter) CSA and FM Nonincendive – Class I, II, III, Division 2,
MGG18D, F, U Groups A, B, C, D, F, G
Integral Unit
MGG16D, F, U CENELEC EEx de ia II CT4
Remote Detector
CE Mark Conformity
(Europe)
MagneW 3000 PLUS meets the emission limits for EN 50081-1-1993 and the immunity standards
for EN 50082-2-1995.