Honeywell MagneW 3000 Plus - Introduction to MagneW 3000 PLUS; Components and Configurations

1/98 MagneW 3000 PLUS Specification and Application Guide 1
Introduction
The MagneW 3000 PLUS
electromagnetic flowmeter consists of a
detector/converter combination that
operates on the principles of Faraday’s
Law. Based on Honeywell’s proven
MagneW 3000 flow measurement
technologies, the
PLUS detectors offer
expanded flow rate and process
measurement capabilities when used
with the new range of
PLUS converters.
The MagneW 3000
PLUS offers
• a wide range of wafers and flanges,
• IDF and Tri-Clamp couplings,
• local data setting device,
• batch control with preset counter trip,
• automatic dual-range switchover with
reverse flow,
• high and low alarm settings,
• continuous self-diagnostics, and
• remote communication with SFC.
The MagneW 3000
PLUS is part of the
TotalPlant Solution (TPS) system.
TPS is the evolution of TDC 3000
X
.
Components
As shown in Figure 1, the MagneW 3000
PLUS flowmeter includes a detector and
converter available in an integral-type
or a remote-type configuration.
With an integral-type configuration, the
converter mounts directly onto the
detector.
With a remote-type configuration, the
detector is connected by cables to the
converter which can be mounted up to
300 meters (984 feet) away, depending
on the application.
Integral Converter/Detector
Remote Converter
Remote Detector
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
23441
Figure 1—MagneW 3000 PLUS Components