Honeywell RTH7500D - Remove Old Thermostat; Safety and Removal Procedures

69-1730 6
Step 3. Remove Old Thermostat
1. Turn off power at the heating and/or cooling system
or fuse/circuit breaker panel.
2. Remove the cover from the old thermostat.
3. Remove the old thermostat from the wall or wall-
plate. Do not remove the wires.
MERCURY NOTICE
If you are replacing a thermostat that contains mercury
in a sealed tube, do not place your old thermostat in the
trash.
Contact your local waste management authority for
instructions regarding recycling and the proper disposal
of an old thermostat containing mercury in a sealed
tube.
Y
G
C
R
W
OLD THERMOSTAT
.1
8
.2
.25
.3
.9
.7
.5
.4
L
O
N
G
E
R
THERMOSTAT
COVER
WALLPLATE
M22036
69-1730.fm Page 6 Tuesday, July 13, 2004 12:45 PM