Honeywell S4-34440-02 - Output with Supervisory Input Mode; Output with Fault Input Mode

Output with Supervisory Input mode
This is when a channel is configured as an output and the channels input terminals are Supervisory Input.
Mode settings notes
Output / Supervisory
input
Output Type See page 4.
Sync. pulse See page 4.
Failsafe
See page 4.
Mains Failure See page 4.
Input Delay See page 6.
Input normally See page 6.
Output normally See page 4.
Output with Fault Input mode
This is when a channel is configured as an output and the channels input terminals are Fault Input.
Mode settings notes
Output / Fault input Output type See page 4.
Sync pulse See page 4.
Failsafe See page 4.
Mains Failure See page 4.
Input Delay See page 6.
Output normally See page 4.
4188-968 issue 2_Part 2_09-10_S4 mains interface 9
S4 Mains powered interface unit Commissioning information
www.acornfiresecurity.com
www.acornfiresecurity.com